There are times when the integrated storage system of your vehicle is just not enough your luggage outside. And the only place you could easily put your stuff is on the roof. That's why the car roof racks were a vital car accessory for many car owners. It is the best way to transport large, irregularly shaped or difficult to handle objects that just would not fit inside the vehicle. You just have to make sure that you attach everything correctly. Otherwise, your stuff could end up bouncing down the road.
When installing a car roof rack, you must be very careful not to scratch the paint of your car. Here are some tips that will help you install your car roof rack without damaging the paint of your car.
1. Wash your car. If your car is covered with dust, road salt, tar, insects and other substances, it is advisable to wash your car before installation. When you wash your car, avoid using dish detergent to wash or soap. Doing otherwise will remove wax from your car and can cover your car paint with swirl marks.
You can use two buckets. One is for water and one for water and soap. After soaped down a part of the car, dip and rinse the sponge in the bucket of clean water before soaping again. This will minimize dirt that will go into the soap solution that could rub against the paint of your car when applying soap.
2. Dry your car . After washing by ensuring dry the car. This will help clean the air and prevent the water evaporated leaving deposits or water spots.
3. Evenly wax and buff. This step will protect the car against harmful elements. It is important to ensure that the roof of your car has at least one good coat of wax before installing the roof support.
4. Place the roof support . Simply place carefully to where to go, but not yet installed. You must ensure that the rack is correctly positioned, leaving a small space between the rack and the roof.
5. Cut some vinyl tape. Once the roof rack is installed, it creates a situation where some particles of dust, salt and moisture can get stuck there with the base bars rub up against the paint of the car. This is what causes the damage that most car owners complain.
To avoid this, you need a pair of transparent vinyl strips between the roof and the feet of the base bar. This is why waxing the car roof is very important because it ensures vinyl protection. In addition, it will strip the vinyl easier to take off in the future.
6. Apply vinyl film . While the rack is held in place, applying the film pasting a first side. Then, gently and firmly slide your hand through the vinyl to take out the tiny air bubbles. If the vinyl is not properly smoothed the edges are firmly fixed and the air bubbles are present, it will quickly take off and the dust particles could easily become trapped by the vinyl tape.
After a while and want to remove the vinyl film, you should see a bright spot where he was. This does not mean anything to be worried because it means your car is simply dirty and the bright spot you see is just a clean place. Your car will need cleaning and waxing to solve the problem.
0 Komentar