How to prevent your headlight bulbs blow too often

How to prevent your headlight bulbs blow too often -

If you find your headlight bulbs blow on a regular basis, there could be several reasons why it is happening and identifying what the problem is, you will save yourself the cost of buying constantly replacement bulbs, and the hassle of having to constantly change.

Do you use your headlight bulbs for long periods?

the typical expected lifetime of a standard halogen headlight bulb is about 350 to 400 hours, so if you drive a lot during the long winter nights or even if you keep your lights on during the day, it is possible that your bulbs could last 2 to 3 months.

it is important to note that if you installed xenon bulbs update, they usually last only about 0 hours, because they were indeed modified to improve luminous efficiency. For drivers who use their headlamp bulbs for long periods, you can reduce the amount of time between changes by adapting bulbs long life lamps.

These tougher Car bulbs contain heavy duty reinforced components and usually last three times longer than standard halogen bulbs, while providing the same performance lighting than regular halogen bulbs.

you touch the glass bulb when you change?

If you touch the glass section of the headlight bulb bare hands, the natural oils in your skin will leave a little grease residue behind. When the halogen bulb is on the oil patch will create a hotspot in the bulb and lead to early failure. Therefore, it is a good idea to wear latex gloves when installing new halogen bulbs.

are the bulbs become damp or suffering Excess Vibration?

While most major tempered glass used bulb manufacturers in the construction of their headlight bulbs, they are still vulnerable to thermal shock effects. This means that, if they come into contact with water that has flowed inside the headlight unit, then it is very likely that the bulb is damaged. It is also important to ensure the bulb is firmly established if additional knocks and bumps, it will be subjected to can damage the filament

Is the electric car work the system correctly?

When installing bulbs make sure the electrical connectors of the power of the head lights are firmly connected to the metal connectors on the basis of the headlight bulbs, otherwise it is easy to get a short circuit and blow the bulb.

it is also important to check that the alternator overload the battery and providing more voltage than the bulb is designed for. Typically, the maximum voltage of a bulb is about 13.2 volts.

Do you buy bulbs headlights Good Quality?

While bulbs cheapest cars may seem like a good idea, they typically lack the high quality and precision components used by major manufacturers such as Osram and Philips, and will not last as long. high quality bulbs will be labeled with the E1 mark, indicating that they have undergone testing standards and the highest quality.

Previous
Next Post »
0 Komentar